|
Lead-times are based on
working days M-F
Turn times can be longer due to
the quantity or complexity of parts
Published 11-29-2010 |
| Bake 1-12
hours |
1 day |
| Bake 13-24
hours |
2 days |
| Black
Oxide |
8 days |
| Boric
Sulfuric Anodize |
3 days |
| Cad
Plating |
4 days |
| Cad Yellow
Dip |
1 day |
| Chem
Film |
2 days |
| Chromic
Anodize |
3 days |
| Conductivity |
3 days |
| Copper
Plating |
5 days |
| Cryogenic
Processing |
10 days |
| Decorative
Chrome |
5 days |
| Degrease |
0 days |
| Dow 17 |
5 days |
| Dow 7 |
3 days |
| Dry
Blast |
3 days |
| Dry Lube |
4 days |
| Eddy Current
Inspection |
3 days |
| Electroless
Nickel |
5 days |
| Glass
Bead |
2 days |
| Hard
Anodize |
12 days |
| Hard Anodized
Dyed |
12 days |
| Hard
Chrome |
27 days |
| Hardness
Testing |
1 day |
| High Temp
Stress Bake |
2 days |
| Inspection |
0 days |
| Magnetic Particle Inspection* |
3 days |
| Masking |
3 days |
| Nickel
Acetate |
0 day |
| Nickel
Plating |
3 days |
| Nickel
Strike |
0 day |
| Oil |
2 days |
| Package |
0 days |
| Part
Marking |
2 days |
| Passivation |
3 days |
| Penetrant |
2 days |
| Phosphate
Coat |
3 days |
| Phosphate
Fluoride |
2 days |
| Polishing |
10 days |
| Prime |
2 days |
| Sand/Blend |
2 days |
| Shot
Peen* |
5 days |
| Silver
Plate |
5 days |
| Spray
Dot |
2 days |
| Stress
Relieve |
2 days |
| Sulfuric
Anodize |
3 days |
| Sulfuric
Dyed |
4 days |
| Teflon
Coat |
5 days |
| Thermal
Spray |
30 days |
| Tin
Plate |
5 days |
| Top Coat |
3 days |
| Ultrasonic
Inspection* |
10 days |
| Unmask |
0 days |
| X-Radiography* |
5 days |
| Zinc
Plate |
10 days |
| Zinc
Cobalt |
10 days |
| Zinc
Nickel |
3 days |
| * Turn time is contingent to approval of
technique, if applicable. |
EXPEDITE POLICY
Expedite lead-times will be approximately two thirds "standard"
lead-time. (Standard lead-time 5 days, Expedited lead-time 3 days) Parts
will not be expedited if it is not clearly stated "EXPEDITE" on the purchase
order. Expedite charges will be assessed per chargeable process. A list of
chargeable processes vs. non-chargeable processes is available upon
request.
Orders requiring shorter turn times then an expedited lead-time must be evaluated on a case by
case basis and the cost of the expedite will be dependent upon the amount of
additional labor and/or resources required to meet that date.
Expedited lead-times are based on
normal workdays Monday through Friday. Weekend expedite charges will be
assessed on a case by case basis. Weekend work must be requested by the
Thursday prior to the requested weekend.
LEAD-TIME POLICY
Lead-time is the amount of time estimated to process parts in the
shop, which will begin when the parts are released to the floor. This could be
delayed due to the lack of required information on a given purchase order, such
as material type, heat treat or defined masking instructions. Parts received in
the shipping department, in the afternoon, will be released to the floor the
following morning. Parts received in the morning will be released to the floor
that afternoon.
DAMAGED OR MISSING PART POLICY
Metal Finishing Company's policy regarding damaged or missing parts
is detailed at the bottom of each quotation form as well as on the back of each
invoice. Please call if you have any questions concerning this policy.
CUSTOMER SERVICE
Each Company will be assigned an Customer Service Representative to
service your account.
|
|
