Course Description
| Method: |
Magnetic Particle |
Date: |
TBD |
| Course Name: |
Magnetic Particle For Aerospace |
Time: |
8:00a - 5:00pm |
| Duration: |
4
Days |
Instructor: |
Robert Potter - NAS/ASNT Level III |
| Training Hours: |
32
Hours |
Cost: |
$675.00/person |
| Course Location: |
Metal Finishing Training Facility - 701 East Murdock (See Map)  |
WHO SHOULD ATTEND: Entry Level NDT Personnel,
Inspectors, Supervisors and Auditors
PREREQUISITES: All course attendees should have a
basic knowledge of the Magnetic Particle process. Basic knowledge may come from
self study; computer based training or previous institution training. The
principals of each method are discussed in each class with the applications and
methodology covered in detail specific to the aerospace industry.
ABOUT THE COURSE: This course meets the training
requirements of Aerospace Industries Association - National Aerospace Standard
NAS 410, Certification & Qualification of Nondestructive Test Personnel;
and complies with the training guidelines of the American Society for
Nondestructive Testing (ASNT) Recommended Practice No. SNT-TC-1A, ANSI/ASNT
CP-189 and American National Standard CP-105. The course addresses the
inspection and process control methodology of ASTM Standard E1444 and
incorporates the process control attributes of NADCAP (Performance Review
Institute) specification AC7114. Attendees will receive formal classroom
training, hands on inspection and be required to perform all process controls
relative to aerospace requirements. Hands on inspection will include the
processing of aerospace hardware and inspection of parts with known defects.
ABOUT THE INSTRUCTOR: Robert Potter is an employee
of the Metal Finishing Company where he serves as the Responsible NDT Level
III. He has thirty years of nondestructive testing experience in aerospace and
nuclear power. He is an ASNTcertificated Level III, a NAS 410 Level III with
Metal Finishing and an ASNT Fellow - Class of 2002. Mr. Potter is also on the
Certification Management Council of ASNT where he is a committee member of the
penetrant, eddy current, ultrasonic, magnetic particle committees and Chair
Person of the Radiography and Neutron Radiography committees.
AREAS COVERED
- Personnel Qualification Requirements
- Industry Reference Documents
- Definitions
- Magnetic Particle Equipment &
Materials
- Part Preparation
- Suspension Application
- Magnetizing Shot Duration
- Non-Relevant Indications
- Field Strength
- Process Control - Daily, Monthly, 6 Month
- Inspection White Light
- UV Light Intensity
- Particle Concentration
- Suspension Brilliance
- Suspension Contamination
- Amperage Verification
- System Effectiveness
|
- Internal Shorting Test
- " Timer Control
- Viscosity Verification
- Amp Meter Accuracy,
- AS5282 Ring
- Magnetization Types and Calculation of
Amperage.,
- Direct Circular Magnetization
- Central Conductors,
- Longitudinal Magnetization Using Coils ,
- Fill Factors
- Demagnetization of Parts
- Post Cleaning and Corrosion Protection
- Marking of Accepted Parts
- Elements of the Magnetic Particle
Technique,
- Use of QQI's
- Use of Hand Held Gauss/Tesla Meter
- Suspension Control
|
WHAT EACH ATTENDEE WILL RECEIVE
1. Study Guide
based on the Power Point Presentation
2. Reference Materials
3. Diploma
documenting course completion
4. Attendance List with Course Outline
|
