Processes and Capacities

• Abrasive Blasting (Glass, Aluminum Oxide, Plastic Media, Satin Finishes)
• Acid Pickle - Tank sizes ( 84" X 30" X 48"), ( 96" X 29" X 48"), ( 144" X 48" X 84")
• Alkaline Cleaning - Tank sizes - (84" X 21" X 42"), ( 96" X 29" X 48"), ( 144" X 40" X 84")
• Alodines 600, 1200, 1500, 1800 - Tank sizes ( 48" X 24" X 60")
• Anodizing (Sulfuric, Boric-Sulfuric & Chromic) Types I & II -Tank size ( 190" x 36" x 60")
• Anodizing Type 2, Class 2 Dyes, Gold, Black, Blue, Red, Green -Tank size (36" X 23" X 60")
• Black Oxide Coating -Tank sizes (60" x 20" x 28")
• Cadmium Plating Types I,II & III , Classes 1, 2, & 3 -Tank sizes (84" x 48" x 42")
• Chemical Conversion Coating Class 1 & Class 3 -Tank sizes (192" x24" x 60")
• Cleaning -Tank sizes (36" x 23" x 36")
• Descaling -Tank sizes (36" x 23" x 36")
• Copper Plating -Tank sizes (36" x 23" x 36")
• Dow 17 Anodize Types I & II, Classes C & D -Tank sizes (48" x 30'"x38")
• Dow 7 Treatment -Tank sizes (84" x 29" x 42")
• Dry Film Lubrication
• Decorative Chrome -Tank sizes (96" x 54" x 48")
• Electroless Nickel Plating Class 1 & 2 -Tank sizes (24" x 36"x 32")
• Gold Strike & Gold Plating - Tank sizes (24" x 24" x 30")
• Hard Anodize Type III - Tank sizes (125'"x23" x 40") Class 1 & 2
• Hard Chrome Plating Class 1 & Class 2 - 5 Cells - Tank sizes (120" x 36" x 48")
• Stress Relief & Hydrogen Embrittlement Relief Baking: 10 Ovens (0-1000°F)
• Masking, all media
• Nickel Plating - Tank sizes (96"x 54" x 48")
• Nickel Strike - Tank sizes (84" x 21" x 42")
• Part Marking via Ink Jet
• Passivation Type II, VI & VIII - Tank sizes (84" x 16" x 42")
• Phosphates Coating- Zinc & Maganese - Tank sizes (34" x 24" x 42")
• Phosphate Fluoride Coating of titanium - Tank size (96" x 22" x 40")
• Pickle - Tank sizes (86" x 36" x 42")
• Polishing
• Prime/Paint, three paint facilities
• Shot Peen Machine,(2) Wheelabrator Pneumatic, 18" wheel
• Shot Peening Inner Diameter Machine
• Shot Separator, Sweeco
• Silver Plating Types 1, 2, & 3 - Tank sizes (24" x 24" x 30")
• Tin Plating -Tank sizes (24" x 24"x 30")
• Vapor Degreasing
• Zinc Nickel -Tank sizes (24" x 24" x 30")
• Zinc Plating Rack and Barrel Types I & II- Tank sizes (144" x 84" x 84")

NDT Services

• ASNT NDT Level III consulting
• AWS Certified Weld Inspection
• Conductivity, Hardness Testing and Temper Verification
• Eddy Current Inspection
• Fluorescent Penetrant Inspection/
• Leak Testing
• Magnetic Particle Inspection
• Pre-weld/braze cleaning of ferrous and non-ferrous materials (Tank size 96" x 22' x 40")
• Ultrasonic Inspection - Wrought, Machined Parts and Composites
• Welder and Weld Procedure Qualification (MIL-STD, AWS, ASME, Aerospace)
• X-Radiography of composites, cast and welded sub-assemblies
• FAA Repair Station

Cryogenic Processing

• Extend tool and machine parts life by up to 1000% though deep freezing to -320 degrees below 0
• Cryogenic Unit 3' x 4' x 8' Combination Cryogenic and Tempering

Flame Spray Services

• Thermal or Plasma coatings in a wide variety of materials
• Boeing BAC 5851        Type I coatings
• Raytheon BS25328      All coatings
• AMS 2473                     All coatings
• FAA Repair                  All coatings
• Gas Line Pump Component Repair
• Certified Testing Services
• Pre-coating and Post-coating Machining Capabilities

Diversified Services, Wellington Division
Processes and Capabilities (*all Tanks 960" x 60" x 24")

• Chemical Conversion Class 1 and Class3
• Chromic Acid Anodize Type I and IB
• Fluorescent Penetrant Inspection
• Parts Masking
• Prime/Paint
• Shot Peening
• Part Marking